Best Mini UPS for CCTV Camera in Bangladesh: Complete Buying Guide
Imagine your security camera recording a shop
entrance when load shedding suddenly cuts the electricity. The camera, router,
or recorder may switch off precisely when you need footage most. A compatible
Mini UPS for CCTV camera can help maintain surveillance during short power
outages—but buying the wrong unit may leave your system offline.
This Bangladesh-focused guide explains 12V CCTV
backup, PoE cameras, DVR/NVR requirements, battery runtime, and Mini UPS
prices. It also covers offices using Tipsoi access control alongside CCTV.
Quick Answer: Which Mini UPS Is Best for CCTV?
For one low-power 12V camera, consider a Mini DC
UPS with a matching 12V output and sufficient wattage. For a router, ONU, and
camera together, calculate their combined load and choose enough ports and
battery energy. For PoE cameras or multiple security devices, check a
higher-output UPS such as the MARSRIVA KP7 Pro or KP9 Pro, but verify PoE type,
power distribution, and recording equipment first.
A Mini UPS cannot automatically power every CCTV
system.
What Is a Mini UPS for CCTV Cameras?
A Mini UPS is a compact rechargeable backup power
supply designed for compatible low-voltage devices. During a power outage it
supplies electricity from its battery, helping prevent cameras or networking
equipment from shutting down. Some models provide 5V, 9V, and 12V DC outputs,
while selected units support PoE.
Unlike a large AC UPS, a Mini DC UPS generally
cannot run ordinary 220V AC equipment directly. Its suitability depends on
voltage, available current, connector polarity, battery capacity, and switching
behaviour.
Which CCTV Systems Can Use a Mini UPS?
1. Standalone WiFi Security Camera
Many indoor and outdoor WiFi cameras use an
external DC adapter. If your camera is rated 12V DC and draws a manageable
amount of power, a compatible Mini UPS may keep it running. Check the exact
power label—not just the camera's megapixel rating.
If footage saves to microSD, recording during an
internet outage depends on the model's offline recording support. Mobile
viewing also requires the router, ONU, and upstream internet service to remain
available.
2. Wired 12V CCTV Camera with DVR
A small 12V camera may stay powered while its DVR
switches off. In that situation, the system may not save footage to the
recorder. Plan backup for the cameras and DVR, not only the camera. Check
whether the DVR uses an external DC adapter or AC mains input.
3. PoE IP Camera and NVR
PoE cameras receive data and power through
Ethernet. A supported UPS may feed an appropriate PoE device, but 24V passive
PoE and standards-based IEEE 802.3af/at PoE must not be treated as
interchangeable. For several cameras, backing up a compatible PoE switch and
NVR with a properly sized UPS may be more practical.
Mini UPS vs Standard UPS for CCTV
|
Feature |
Mini
DC UPS |
Regular
AC UPS |
|
Best application |
Selected DC cameras, routers, ONU, compatible PoE |
DVR/NVR systems with AC adapters, monitors,
larger loads |
|
Output |
Model-dependent DC/PoE |
AC sockets |
|
Size |
Usually compact |
Usually larger |
|
Main limitation |
Voltage and total wattage |
Size, efficiency and runtime at small loads |
Choose based
on the complete recording chain rather than the lowest purchase price.

5V, 9V, 12V and PoE: What Matters?
Before connecting a Mini UPS, read every device's adapter
and technical datasheet.
Voltage: A
device requiring 12V must receive an approved 12V output.
Current: The
UPS output must safely supply the required amperage.
Connector
and polarity: The DC plug dimensions and centre-positive/negative wiring
must match.
Total watts:
Add all simultaneous loads and stay below the UPS's total rating.
PoE
standard: Confirm voltage, negotiation method and power budget for any PoE
connection.
For example, a camera labelled 12V, 1A may require
a supply capable of delivering up to 12W; its actual consumption can be lower.
Night illuminators, infrared LEDs, spotlight activation and motorised movement
may raise its load.
How Many Hours Can a Mini UPS Power CCTV?
Battery size in mAh alone does not tell you
runtime. Compare energy in watt-hours (Wh) and measure total connected load in
watts (W).
Estimated hours = Battery Wh × usable-efficiency factor ÷ connected watts
For illustration, a 29.6Wh battery with an assumed
80% usable output powering an 8W camera gives approximately 2.96 hours. At a
16W combined load, the same estimate falls to 1.48 hours. These are
calculations, not verified backup-test results.
Actual runtime changes with conversion losses,
battery age, temperature, recording mode and night-time power consumption.
Check the manufacturer's Wh figure and test the installed setup.
Best Mini UPS Options at Asiabiz
These examples are based on published
specifications—not independent performance rankings. Confirm current stock,
battery ratings and output compatibility before buying.
MARSRIVA ET1 8000mAh — Compact 12V Backup
The MARSRIVA ET1 lists 29.6Wh capacity, 18W maximum
total output, two 12V DC outputs, a 9V output and 5V options. It is a starting
point for one suitable low-power security camera, or another small DC
arrangement within the limit.
Solitine SOL-604 10000mAh — Flexible DC Outputs
The Solitine SOL-604 Premium advertises 10000mAh
and 24W maximum output, with selected 5V/9V/12V interfaces. It may suit a
compatible camera plus networking device if every output and the combined load
are supported. Confirm its Wh rating before estimating backup time.
MARSRIVA KP4 Max 20000mAh — More Battery Energy
The MARSRIVA KP4 Max is listed with 74Wh energy and
18W maximum total output. Its greater stored energy can be helpful for a modest
load, but the 18W ceiling limits how many devices can run simultaneously.
MARSRIVA KP7 Pro 24000mAh — Multi-Output CCTV Option
The MARSRIVA KP7 Pro offers 76.8Wh LiFePO4, 100W
maximum total output, multiple 12V outputs and an advertised 24V/48V Gigabit
PoE output. It is worth evaluating for several compatible DC devices or a
carefully designed PoE installation. Verify PoE standards and required power
per device.
MARSRIVA KP9 Pro — Advanced Network Equipment
The MARSRIVA KP9 Pro also lists 76.8Wh and 100W
maximum output, but adds more DC voltage choices, including selected 48V/53V
outputs. Consider it only where those outputs match the specific NVR, switch or
networking equipment.
Mini UPS Price in Bangladesh
Asiabiz listings checked in November 2026 showed
approximate device prices: ET1 ৳1,750,
Solitine SOL-604 ৳1,700,
KP4 Max ৳3,200, KP7 Pro ৳7,800, and KP9 Pro ৳11,400. These are online
listing snapshots, not guaranteed final prices. Stock, promotions and warranty
conditions may change.
Browse the Mini UPS category for updated pricing.
What About Tipsoi Access Control Backup?
CCTV and door access control often protect the same
office. Tipsoi is a biometric attendance and access-control brand, not a Mini
UPS manufacturer. For example, Asiabiz lists the Tipsoi Prompt P310 with a
12V/2A power requirement and 15W maximum consumption.
A correctly rated 12V UPS might help keep the
terminal operational during load shedding. However, that does not establish
compatibility with any particular Mini UPS, nor does backing up the terminal
automatically power the electric lock, controller, network or exit hardware.
The complete door system must be designed to preserve safe emergency egress
under power failure. Ask an installer to verify the wiring and power budget.
For workplaces combining CCTV and Tipsoi
attendance, calculate separate camera, recording and access-control loads
before choosing a shared backup system.

Which Backup Setup Fits Your Property?
Apartment or small room: Back up a compatible
standalone WiFi camera and, if remote access matters, the router and ONU.
Shop or office: Plan simultaneous backup for
camera, recorder, and critical network devices. A single 18W Mini UPS may be
insufficient.
Building gate or rooftop: Check outdoor camera
night-time wattage and the cable route. Keep indoor-only UPS units protected
from heat, rain and moisture.
Multi-camera system: Consider professionally sized
AC UPS, DC distribution, or a dedicated PoE backup arrangement rather than
connecting many cameras to one small Mini UPS.
Frequently Asked Questions
Q: Can a 12V Mini UPS run a CCTV camera?
A: Yes,
when the voltage, current, connector, polarity and total power rating match the
exact camera.
Q: Can one Mini UPS run four CCTV cameras?
A: Possibly
with a suitable higher-output system, but not automatically. Add all device
wattages and include the DVR/NVR or recording equipment.
Q: Does a CCTV camera record without internet during load shedding?
A: Some
locally recording cameras can, provided their power and recording media remain
available. Remote access may still stop.
Q: Is a 20000mAh Mini UPS always better?
A: No.
Compare Wh capacity, output watts, voltage compatibility and actual runtime,
not just mAh.
Q: Can Mini UPS support PoE CCTV cameras?
A: Some
models offer PoE outputs, but the camera's actual PoE standard, power class and
any switch or injector requirements must be verified.
Final Verdict: Best Mini UPS for CCTV Camera in Bangladesh
For a single compatible 12V camera, a compact Mini
UPS may be enough. For several cameras, PoE networks or NVR recording, select
backup equipment based on the total system load and supported outputs. If your
workplace also uses Tipsoi access control, include its power needs without
compromising door-exit safety.
Compare verified options at Asiabiz Technology and request an electrical compatibility check before installation.
Comments
There are no comments for this Article.